Introduction
CSX-SEN-645A-D is a ball-type tilt switch used to detect the tilt state of a device. It contains a free-rolling metal ball inside. When the device is tilted to a certain angle, the metal ball moves and triggers the switch, thereby changing the on-off state of the circuit. This switch is widely used in devices that need to detect tilt or flip status, such as smart homes, automotive electronics, digital products, and sports and health equipment.
|
Voltage |
0.5~2.4VDC |
|
Current |
2uA-10mA |
|
Closed resistance |
<30Ω |
|
Insulation resistance |
>10MΩ |
|
Temperature range Operating |
-40℃ to 80℃ |
FUNCTIONS
1. High-sensitivity tilt detection
The CSX-SEN-645A-D tilt rolling ball switch has a clear trigger angle range, and can achieve state switching within a tilt angle of ±45° ±10°. The switch is designed with a rolling metal ball structure. When the external device is tilted, the ball rolls in the cavity and triggers the contact to close or disconnect, achieving the signal switching effect. Since it relies on a purely mechanical structure and does not require any external power supply assistance, it has a simple structure and fast response speed, and has practical value in smart wearable devices and portable instruments.
2. Low power consumption
The static power consumption of the switch in the non-trigger state is 0μA, and there is no standby current loss at all. This feature makes it very suitable for products with strict energy consumption requirements, such as battery-powered devices or IoT terminals. Compared with Hall effect sensors or MEMS chip-based tilt detection solutions, CSX-SEN-645A-D does not involve continuous power supply or complex amplification circuits, and the circuit structure is simpler and the long-term operation stability is higher.
3. Long mechanical life
According to the factory test standards, CSX-SEN-645A-D can pass the 100,000 times mechanical action life test, indicating that it can still maintain the stability of the contact function under long-term mechanical vibration or repeated action environment. The rolling ball adopts metal plating treatment to improve corrosion resistance and conductivity. At the same time, its contact resistance is controlled below 30Ω, ensuring stable signal transmission and reliable contact in the on state.
4. Wide adaptability to working environment
The operating temperature range of this product covers -40℃ to +85℃, which can adapt to a variety of complex indoor and outdoor application environments, and is not easy to cause performance fluctuations due to temperature differences. Its insulation resistance can reach more than 100MΩ under DC 500V test conditions, with good electrical isolation capability, which can effectively prevent the signal from being affected by moisture or external electromagnetic interference.
Hot Tags: tilt roll ball switch csx-sen-645a-d, China tilt roll ball switch csx-sen-645a-d manufacturers, suppliers, factory, industrial tilt switch, tilt switch sensor wholesale, modular tilt switch, tilt switch sensor custom, mini tilt switch, mercury switch tilt sensor
