Inclinometer Tilt Sensors S645B

$0.22 | 10 piece (Min.Order)

Inclinometer Tilt Sensors S645B

Product Introduction:

When the switch is perpendicular to the ground, it remains in a stable normally open state (OFF). When the switch tilts towards any direction and reaches the transition angle, its internal gold-plated rolling ball immediately triggers the conduction circuit (ON) and outputs a low-level signal to trigger the operation of the microcontroller (MCU).
1. 360 ° all-round angle detection without dead corners;
2. Conversion angles: 15 °, 25 °, 30 °, 45 °.

Send Inquiry

Add To Cart

Download

Description

Technical Parameters

Voltage	0.5~2.4VDC
Current	2uA-10mA
Closed resistance	<30Ω
Insulation resistance	>10MΩ
Temperature range Operating	-40℃ to 80℃

Product Features

High-precision Measurement
The inclinometer tilt sensors S645B uses advanced MEMS (micro-electromechanical system) sensor chips with a high resolution of ±0.005° to ensure the accuracy of the output data. Through temperature compensation algorithms and nonlinear calibration technology, it controls the measurement error of the entire temperature range (-40°C to 85°C) within ±0.1°, which is 30% more accurate than similar products and meets various high-precision tilt monitoring needs.

Rugged And Durable Structure
The shell of the inclinometer tilt sensors S645B is made of high-strength aluminum alloy, anodized, with a surface hardness of more than HV300 and an impact resistance of 500g (half-sine wave, 11ms), which can withstand harsh environmental forces. The internal potting process is filled with high-elastic silicone to achieve IP67 protection level, effectively isolate water vapor, dust and corrosive gases, and ensure the stable operation of the sensor under complex working conditions.

product-1752-1731

APPLICATIONS

Construction Engineering Field
In construction engineering, inclinometer tilt sensors S645B is mainly used to monitor the tilt of buildings and large structures.

Transportation Vehicle Field
In terms of transportation vehicles, inclinometer tilt sensors S645B is responsible for monitoring the posture of vehicles while driving.

Industrial Automation Field
In industrial automation scenarios, inclinometer tilt sensors S645B is used to calibrate and monitor the horizontality of industrial equipment.

Energy and Power Field
In the energy and power industry, inclinometer tilt sensors S645B mainly monitors the tilt of wind turbine towers.

Geological Monitoring Field
In geological monitoring work, inclinometer tilt sensors S645B warns of geological disasters such as landslides.

product-1200-371

fAQ

Q: What is the measuring range of a tilt switch?

A: The measuring range of a tilt switch depends on its specific model and design, and usually covers a tilt angle from 0° to 360° (or a specific angle range).

Q: Are tilt switches waterproof or dustproof?

A: Yes, some tilt switches are waterproof or dustproof and can be used in harsh environmental conditions.

Hot Tags: inclinometer tilt sensors s645b, China inclinometer tilt sensors s645b manufacturers, suppliers, factory, Omnidirectional Tilt Disturbance Switch, roll ball sensor switch, metal ball tilt switch tilt angle sensor, Tilt switch angle sensor, Inductive sensor impact detection, angle Switch Sensors