Advantages
1. High sensitivity and accuracy
The S45 tilt switch angle sensor uses an integrated MEMS gravity sensor chip to identify the angle of the object's tilt state. Its angle response threshold accuracy can be controlled within the range of ±1°, which is suitable for application scenarios that require accurate identification of small angle offsets. At the same time, the sensor has a response time of less than 100ms, which can meet the requirements of industrial equipment such as robotic arms, lifting platforms, and automatic guided vehicles that have high requirements for motion recognition speed.
2. Stable and reliable switch output
The S45 adopts a non-contact detection structure, which does not have the wear problem of traditional mechanical structures, so it has a longer service life and higher stability. The output signal is a standard digital switch quantity, supporting NPN or PNP output mode, which is convenient for seamless connection with PLC control systems, alarm equipment, etc. The rated output current of the sensor is 100mA, and the operating voltage range is usually 10~30V DC, which can meet the electrical requirements of most industrial control systems.
3. Strong anti-interference ability
The product has been fully tested in terms of electromagnetic compatibility and can maintain signal stability in industrial environments with strong interference sources. Its circuit system has passed the IEC61000-4-4 electrical fast transient immunity test with a tolerance of ±2kV, and also passed the IEC61000-4-2 electrostatic discharge immunity test with an air discharge test voltage of ±8kV.
4. Industrial-grade rugged structure
The S45 sensor housing has an IP67 protection level, which can effectively prevent the intrusion of dust, water and oil, so as to adapt to various complex environments such as open-air operations, high-humidity workshops or oily equipment surfaces. Its operating temperature range covers -40°C to +85°C, which is suitable for outdoor equipment, low-temperature storage systems or high-temperature working conditions. Impact and corrosion resistance, extending the service life of the equipment in harsh environments.
|
Voltage |
0.5~2.4VDC |
|
Current |
2uA-10mA |
|
Closed resistance |
<30Ω |
|
Insulation resistance |
>10MΩ |
|
Temperature range Operating |
-40℃ to 80℃ |
Tilt Switch Angle Sensor S45 is a non-contact angle detection device, which uses internal gravity sensing elements (such as MEMS chips or ball bearings) to determine whether an object exceeds the set tilt angle. Once the tilt angle exceeds the preset value, the sensor will output a switch signal to monitor and control the position or state. It is widely used in industrial automation, mechanical equipment, security systems and other fields.
Hot Tags: tilt switch angle sensor s45, China tilt switch angle sensor s45 manufacturers, suppliers, factory, omnidirectional tilt angle detection switch, Tilt protection switch, metal ball tilt switch tilt angle sensor, Car Alarm Shock Sensor, roll ball sensor switch, Tilt switch angle sensor
